3.3 Wiring Method
3-49
ME0342-4B
Operation
4.1 Basic Operation ····················································· 4-1
4.1.1 How to Turn on Power ············································· 4-1
4.1.2 Basic Operation Methods ········································· 4-2
4.1.3 Parameter Settings ················································· 4-8
4.2 Operation in Positioner Mode ··································· 4-9
4.2.1 Operation Modes of Rotary Actuator in Multiple Rotation
Mode and Command Limitations ································ 4-11
4.2.2 Set of Position Table (This section is not required in
selection of pulse train control mode.) ························· 4-12
4.2.3 Control of Input Signal ············································· 4-21
4.2.4 Operation Ready and Auxiliary Signals
(Common to Patterns 0 to 7) ····································· 4-22
4.2.5 Operation with the Position No. Input
(PIO Patterns 0 to 3 and 6) ······································· 4-36
4.2.6 Direct Position Specification
(Operation of PIO Pattern 4 and 7) ····························· 4-63
PCON-CB/CBP
Chapter 4