IAI PCON-CB series User Manual

7. Maintenance and Inspection
7.5 Preventive Maintenance Function
7-11 ME0342-4B
● Basic Operation in Maintenance Information Screen Using TB-02
To set the target value,
touch the Edit button of the relevant item.
The set value will blink and Ten Key
screen will open.
Enter the value with the Ten Key pad
and touch the ENT key.
• The target value will change.
If you touch ESC ,
the target value will not be changed and
the original screen will return.
• A confirmation message will be displayed
to reboot the controller when leaving the
maintenance screen.
Press Yes .
The setting change will take effect
after rebooting.
If the actuator has been replaced,
touch the Actuator replacem. button.
"Total travel count" and "Total travel distance"
will be cleared to "0".
1
Action
2
Action
3
Action

IAI PCON-CB series Specifications

General

Brand	IAI
Model	PCON-CB series
Category	Controller
Language	English