Intel P4304XXMFEN2 User Manual

Intel
®
Server Chassis P4304XXMFEN2/P4304XXMUXX Product Family System Integration and Service Guide
vii
Preface
About this document
This document is written for system integrators and service technicians who are responsible for system
assembly, server upgrades, server repair, and component replacement.
This document is divided into two major sections. The first half of the document provides detailed
instructions on how to assemble a system from the bare chassis to a functional server. It guides you through
the installation of system components and available accessories. The second half of the document is
focused on system service. It provides many reference diagrams use to identify all key physical features of
the system. It also provides detailed instructions for the replacement of field replaceable components.
For the latest revision of this document, go to http://www.intel.com/support
.
Important: Due to differences between the Server Board S2600CW and S2600ST families, some sections of
this guide may have specific procedures for each. When no specific procedure is provided, that procedure is
common to both board families.
Document Organization
System Integration
Chapter 1 – Server Building Block System Integration and Service–Provides grounds-up assembly
instructions for the integration of individual server building blocks, starting with a bare chassis and installing
all the system boards and major server components, including power supply and system fans. (NOTE: Skip
this chapter if the server board and other major components are pre-installed in the system.)
Chapter 2 – Essential System Component Integration –Provides instructions for adding essential system
components required to complete the integration of the server chassis. This includes installation of
processors, memory, add-in cards, and Hot-Swap storage devices.
Chapter 3 – Options and Accessory Kit Integration and Service –Provides instructions for adding and
removing various system options and available accessory option kits that may be installed in the system.
Chapter 4 – System Software Update and Configuration – Provides instructions for completing the
integration of the server chassis by updating the system software and navigating through the BIOS Setup
screens.
Chapter 5 – System Packaging Assembly – Provides package assembly instructions when re-using the Intel
packaging in which the system was originally shipped.
System Service
Chapter 6 – System Features Overview –Provides a high-level overview of the supported Intel® Server
Boards and Intel® Server Chassis P4304XXMFEN2/P4304XXMUXX Product Family, featuring a list of the
server chassis features and illustrations identifying the major system components.
Chapter 7 – FRU Replacement – Provides guidance for the replacement of system components considered
as field replaceable units (FRUs).
Appendix A – Getting Help
Appendix B – System Cable Routing Diagrams
Appendix C – System Status LED Operating States and Definition
Appendix D – POST Code Diagnostic LED Decoder Table for S2600CW Server Board Family
Appendix E – POST Code Diagnostic LED Decoder Table for S2600ST Server Board Family
Appendix F – POST Code Errors

Intel P4304XXMFEN2 Specifications

General

Brand	Intel
Model	P4304XXMFEN2
Category	Chassis
Language	English