Intel S2600CP - Page 122

Hardware Installations and Upgrades
108 Intel
®
Server Board S2600CP Intel
®
Server System P4000CP Family Service Guide
6. SAS/SATA Capable Controller
Option Values: Disabled
Intel
®
ESRT2 (LSI(TM))
Intel
®
RSTe
Help Text:
- Intel
®
ESRT2: Provides host based RAID 0/1/10 and optional RAID 5. Uses Intel
®
ESRT2 drivers (based on LSI* MegaSR).
- Intel
®
RSTe: Provides pass-through drive support. Also provides host based RAID
0/1/10 support, and RAID 5 (in SATA mode only). Uses Intel
®
RSTe iastor drivers.
Comments: This option selects the RAID stack to be used with the SCU. If Disabled
is selected, any drives connected to the SCU will not be usable.
Intel
®
ESRT2 provides host based RAID 0/1/10 and optional RAID 5. For a RAID 5
configuration, this requires one of the Intel
®
RAID C600 Upgrade Keys AXXRKSATA4R5,
AXXRKSATA8R5, AXXRKSAS4R5, or AXXRKSAS8R5. Uses Intel
®
ESRT2 drivers (based
on LSI* MegaSR), and is also supported by Linux MDRAID.
Intel
®
RSTe provides pass-through drive support and provides host based RAID 0/1/10 support,
and RAID 5 (in SATA mode only). Uses Intel RSTe drivers in Windows, and MDRAID stack in
Linux. The Intel
®
RSTe RAID stack is required if it is necessary to provide pass-through support
for non-RAID drives, or if support is needed for more than 8 drives.
Back to [Mass Storage Controller Configuration Screen]