Intel S2600CP - Page 152

Hardware Installations and Upgrades
138 Intel
®
Server Board S2600CP Intel
®
Server System P4000CP Family Service Guide
10. Intel
®
RMM4
Option Values: Not Present
Intel
®
RMM4-Lite
Intel
®
RMM4 + DMN
Help Text: <None>
Comments: Information only
. Displays whether an Intel
®
RMM4 component is
currently installed. This information may come from querying the BMC.
Intel
®
RMM4-Lite is the Management Module without the Dedicated Server Management NIC
Module. When this is present, or if the Management Module is Not Present at all, the fields for
Intel
®
RMM4 LAN Configuration will not be visible.
When an Intel
®
RMM4 + DMN is installed, the options for Intel
®
RMM4 LAN Configuration
will be visible. When IPv6 is Disabled, the IPv4 configuration fields will be visible and the IPv6
configuration fields will not be visible. When IPv6 is Enabled, the IPv4 fields will be grayed out
and inactive, while the IPv6 Configuration fields will be visible.
In either case, the Intel
®
RMM4 section IP Source or IPv6 Source will determine whether the
IPv4 or IPv6 address fields are display-only or can be edited.
Back to [BMC LAN Configuration]
11. IP Source
Option Values: Static
Dynamic
Help Text:
Select RMM4 IP source: If [Static], IP parameters may be edited. If [Dynamic], these
fields are display-only and IP address is acquired automatically (DHCP).
Comments: This specifies the IP Source for IPv4 addressing for the Intel
®
RMM4
DMN LAN connection. There is a separate IP Source field for the Baseboard LAN configuration.
When IPv4 addressing is used, the initial value for this field is acquired from the BMC, and its
setting determines whether the other Intel
®
RMM4 DMN LAN IPv4 addressing fields are display-
only (when Dynamic) or can be edited (when Static).
When IPv6 addressing is enabled, this field is grayed out and inactive.
Back to [BMC LAN Configuration]
12. IP Address
Option Values: [Entry Field 0.0.0.0, 0.0.0.0
is default]
Help Text:
View/Edit IP Address. Press <Enter> to edit.
Comments: This specifies the IPv4 Address for the Intel
®
RMM4 DMN LAN. There
is a separate IPv4 Address field for the Baseboard LAN configuration.