Intel S2600CP - Page 153

Hardware Installations and Upgrades
Intel
®
Server Board S2600CP Intel
®
Server System P4000CP Family Service Guide (Preliminary) 139
When IPv4 addressing is used, the initial value for this field is acquired from the BMC. The
setting of IP Source determines whether this field is display-only (when Dynamic) or can be
edited (when Static).
When IPv6 addressing is enabled, this field is grayed out and inactive.
Back to [BMC LAN Configuration]
13. Subnet Mask
Option Values: [Entry Field 0.0.0.0, 0.0.0.0
is default]
Help Text:
View/Edit Subnet Mask. Press <Enter> to edit.
Comments: This specifies the IPv4 addressing Subnet Mask for the Intel
®
RMM4
DMN LAN. There is a separate IPv4 Subnet Mask field for the Baseboard LAN configuration.
When IPv4 addressing is used, the initial value for this field is acquired from the BMC. The
setting of IP Source determines whether this field is display-only (when Dynamic) or can be
edited (when Static).
When IPv6 addressing is enabled, this field is grayed out and inactive.
Back to [BMC LAN Configuration]
14. Gateway IP
Option Values: [Entry Field 0.0.0.0, 0.0.0.0
is default]
Help Text:
View/Edit Gateway IP. Press <Enter> to edit.
Comments: This specifies the IPv4 addressing Gateway IP for the Intel
®
RMM4
DMN LAN. There is a separate IPv4 Gateway IP field for the Baseboard LAN configuration.
When IPv4 addressing is used, the initial value for this field is acquired from the BMC. The
setting of IP Source determines whether this field is display-only (when Dynamic) or can be
edited (when Static).
When IPv6 addressing is enabled, this field is grayed out and inactive.
Back to [BMC LAN Configuration]
15. IPv6 Source
Option Values: Static
Dynamic
Auto
Help Text:
Select Intel
®
RMM4 IPv6 source: If [Static], IPv6 parameters may be edited. If
[Dynamic], these fields are display-only and IPv6 address is acquired automatically
(DHCP). If [Auto], these fields are display-only and IPv6 address is acquired using
ICMPv6 router / neighbor discovery.