138
3. Changing the interval between the parallel line cursors ·························································179
4. Using the cross hair cursor ·······································································································179
3.3.14 Floating VRM and EBL ·········································································································180
Setting the #1EBL and #1VRM to enable moving ········································································180
Setting the point of reference and center position·········································································180
Operating the EBL and VRM··········································································································180
Canceling the point of reference or center position·······································································180
3.3.15 Using the parallel line cursor·································································································181
The parallel line cursor function is set to #1EBL and #1VRM ······················································181
Operating the parallel line cursor ···································································································181
Canceling the parallel line cursor ···································································································181
3.3.16 Switching the EBL and cursor bearing display among relative, true
and magnetic bearing display mode ·····················································································181
Selection of bearing criteria (magnetic bearing, gyrocompass bearing)······································183
Selection of the bearing criteria ······································································································183
3.3.17 Changing the bearing display method of the PPI screen ···················································183
Course setting in course-up mode ·································································································185
3.3.18 Simultaneously measuring the bearing, distance and travel time to the target·················185
Displaying cursor·····························································································································186
Moving the cursor····························································································································186
Erasing the cursor ···························································································································186
3.3.19 L/L display of the cursor ········································································································187
3.3.20 Magnifying the echo images on the PPI screen··································································187
1. Using the image expansion function ························································································187
2. Changing the transmission pulse width ···················································································188
3. Using the zoom function ···········································································································189
Setting the zoom area···············································································································189
Canceling the zoom ··················································································································190
3.3.21 Reducing unnecessary noise and emphasizing the target·················································190
Set the image processing ···············································································································190
Canceling image processing ··········································································································191
3.3.22 Moving the center of the PPI screen ····················································································191
Setting the position to which the center is relocated.····································································191
Canceling center relocation ············································································································192
3.3.23 Controlling power consumption of the radar········································································192
Setting the transmission time ·········································································································192
Setting the standby time ·················································································································192
Commencing timed transmission···································································································192
Canceling timed transmission ········································································································193
Canceling timed transmission while in standby mode ··································································193
To Next Page
Loading...
