JRC JMA-2343 User Manual

191
x PR2: This function is used in stabilizing unstable images using PR1.
This function is effective when sea surface clutter is abundant.
As a rule of thumb, the function should be used at ranges of 3NM or more.
Canceling image processin
Canceling image processinCanceling image processin
Canceling image processing
gg
g
(a) Select "OFF" in the line "PROCESS" - the menu "FUNCTION".
The image processing function has been canceled.
3.3.22 Moving the center of the PPI screen
By moving the center of the PPI screen (relocating the center), it is possible to extend
the range in any given direction.
z
This function is disabled when the zoom function is enabled or the maximum Range
is in use.
Setting the position to which the center is relocated.
Setting the position to which the center is relocated.Setting the position to which the center is relocated.
Setting the position to which the center is relocated.
(a) Push the soft key ＤＩＳＰＬＡＹ
ＤＩＳＰＬＡＹＤＩＳＰＬＡＹ
ＤＩＳＰＬＡＹ .
(b)
Push the soft key 2 and select first ＯＦＦ
ＯＦＦＯＦＦ
ＯＦＦ ＣＥＮＴ
ＣＥＮＴＣＥＮＴ
ＣＥＮＴ and then ＣＥＮＴＥＲ
ＣＥＮＴＥＲＣＥＮＴＥＲ
ＣＥＮＴＥＲ .
The marker will be displayed on PPI screen.
(c) Use the cross key to position the marker at the center of the desired PPI screen.
z
The marker may be moved up to within 66% of the monitoring range.
(d) Push the ＥＮＴＥＲ
ＥＮＴＥＲＥＮＴＥＲ
ＥＮＴＥＲ key.
The center of the PPI screen will move to the designated location.

JRC JMA-2343 Specifications

General

Brand	JRC
Model	JMA-2343
Category	Marine Radar
Language	English