168
3.2 Monitoring Standby
3.2.1 Changing the brightness of the screen
(a) Push the ＢＲＩＬ／ＨＬ
ＢＲＩＬ／ＨＬＢＲＩＬ／ＨＬ
ＢＲＩＬ／ＨＬ
ＯＦＦ
ＯＦＦＯＦＦ
ＯＦＦ key.
Each time this key is pushed, the brightness of the screen increases by a step.
When the brightness is at the 8th step (maximum) and if the switch is again pushed,
the brightness will be reduced by one step. When the power is turned on, the
brightness level is set at "7".
3.2.2 Changing the brightness of the control panel lighting
(a) Select levels "0" through "7" in the line "DIMMER" - the menu "RADAR SET-UP 1".
The higher the selected number, the brighter the lighting.
(b) Push the ＭＥＮＵ
ＭＥＮＵＭＥＮＵ
ＭＥＮＵ key.
Menu setting has been completed.
3.2.3 Switching among display languages
The language display on the screen may be switched among English, Japanese and
other languages (Chinese, French, Spanish, Italian, Norwegian, German and Korean).
(a) Select the desired language in the line "LANGUAGE" - the menu "RADAR SET-UP 2".
(b) Push the
ＭＥＮＵ
ＭＥＮＵＭＥＮＵ
ＭＥＮＵ
key.
The menu setting has been completed.
3.2.4 Setting the buzzer volume
(a) Select levels "0" through "7" in the line "BUZZER" - the menu "RADAR SET-UP 1".
The higher the selected number, the louder the buzzer.
(b) Push the
ＭＥＮＵ
ＭＥＮＵＭＥＮＵ
ＭＥＮＵ
key.
The menu setting has been completed.
To Next Page
Loading...
Need help?
General
