JRC JMA-2343 - Returning to the Initial Setting Conditions

264
9.9 Returning to the Initial Setting Conditions
In the event such phenomena as the distorted screen or the keys becoming inoperable
occurs while the radar is in use, the following procedures shall be taken to initialize the
system.
 When initialization is undertaken, all setting excluding the menu "INITIAL SET-
TING 1" and "INITIAL SETTING 2" will be reset to the ex-factory shipment condi-
tions.
(a) Push the ＳＴＢＹ／ＯＦＦ
ＳＴＢＹ／ＯＦＦＳＴＢＹ／ＯＦＦ
ＳＴＢＹ／ＯＦＦ key and Ｘ－ＭＩＴ／ＯＦＦ
Ｘ－ＭＩＴ／ＯＦＦＸ－ＭＩＴ／ＯＦＦ
Ｘ－ＭＩＴ／ＯＦＦ key simultaneously.
Power is turned off.
(b) Push the ＭＥＮＵ
ＭＥＮＵＭＥＮＵ
ＭＥＮＵ key, ＥＮＴＥＲ
ＥＮＴＥＲＥＮＴＥＲ
ＥＮＴＥＲ key and ＳＴＢＹ／ＯＦＦ
ＳＴＢＹ／ＯＦＦＳＴＢＹ／ＯＦＦ
ＳＴＢＹ／ＯＦＦ key
simultaneously.
Power will be turned on as in normal operation for turning on power.
Attention