EasyManuals Logo

JRC JMA-2343 User Manual

JRC JMA-2343
310 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
V
Cautions to be used during operation
Do not touch the insides of the scanner unit, transceiver and displa
y
unit.
Touching any high voltage area, you will get an electric shock. For
maintenance, inspection and adjustment of internal parts of these equipment,
consult with our sales office or distributor in your district.
Since the scanner unit radiator rotates, do not approach it.
The scanner unit may start rotating suddenly, and consequently any person may
be struck and be injured. We recommend you to install the scanner unit
radiator on the roof of the wheel house, flying bridge, trestle, radar mast or any
other high position so that no person can approach it. When servicing the
scanner unit, set the scanner unit safety button to the OFF position.
Install the scanner unit at any place higher than any person.
If being exposed directly to electric wave at close range, you may suffer adverse
influence.
When approaching the antenna for maintenance or inspection, set
the power button of the display unit to the ST-BY position.
If being exposed directly to electric wave at close range, you may suffer adverse
influence.
WARNING
CAUTION
Use these radar only as assisting devices for navigation.
Also, the officer should make the final decision for maneuvering b
y
himself.
If you make the final decision of maneuvering only on the information which a
radar display, it may become the cause of accidents, such as collision and
stranding.

Table of Contents

Other manuals for JRC JMA-2343

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JRC JMA-2343 and is the answer not in the manual?

JRC JMA-2343 Specifications

General IconGeneral
BrandJRC
ModelJMA-2343
CategoryMarine Radar
LanguageEnglish

Related product manuals