203
3.5 Miscellaneous Considerations
3.5.1 Replacing the battery (BT1)
In order to maintain the information that has been set, the battery (BT1) needs to be
replaced at regular intervals.
(a) Replacing the battery (BT1) [Type: CR2032-FT6-1, SANYO Electric Co, Ltd.]
• Please call the dealer servicing your locality for a replacement battery.
(b) Reinitializing
• The lithium battery maintains the content of the setting of the menu and soft
key even when the power is shut off allowing use under the conditions of the
last use.
• If this battery runs down, all conditions including the menu will automatically
be reset.
For this reason, initializing is required after replacement of the battery.
When the battery wears down, distance and bearing may become inaccurate.
In such cases, the battery should immediately be replaced and initialization un-
dertaken.
• In the event immediate replacement of the battery is not feasible, initializa-
tion should be undertaken each time the power is turned on as an emergency
measure. However, each time the power is shut off, the content that has
been set is reset.
Please refer to "9.8 Initial Setting" with respect to details on initialization.
Attention
To Next Page
Loading...
Need help?
General
