JRC JMA-2343 - Display of Position Information; Displaying Position Information (Latitude;Longitude, LORAN C Time Difference); Erasing Location Information; Of the Ship and Waypoint Information (Latitude;Longitude)

201
The order of priority in utilizing bearing information is as follows.
Ｍ
ＭＭ
Ｍ Ｌ
ＬＬ
Ｌ
CMPS+, CMPS- terminals ＞ NAVRX, NAVCOM terminals
(priority: high) (priority: low)
3.4.3 Displaying position information (latitude/longitude, LORAN C time difference) of
the ship and waypoint information (latitude/longitude)
Display of position in
Display of position inDisplay of position in
Display of position information
formationformation
formation
(a) Select among "L/L", "TD", "CUR L/L", or "WPT L/L" in the line "POSITION"
- the menu "DISPLAY".
When displaying latitude/longitude : "L/L"
When displaying LORAN C time difference : "TD"
When displaying L/L of the cursor : "CUR L/L"
When displaying the latitude and longitude of the waypoint
: "WPT L/L"
Erasing location information
Erasing location informationErasing location information
Erasing location information
(b) Select "NO" in the line "POSITION" - the menu "DISPLAY".
The location information is erased.
 When "L/L" is selected, it is necessary to input the ship's position (latitude and lon-
gitude) information from a navigation device.
 When "TD" is selected, it is necessary to input the ship's position (LORAN C time
difference) information is a navigation device.
 When "CUR L/L" is selected, it is necessary to input the ship's position (latitude and
longitude) information from a navigation device.
 When WPT "L/L" is selected, it is necessary to input the waypoint’s position (latitude
and longitude) information from a navigation device.
Please refer to "3.6.3 Obtaining information on position" for details.