261
Reception satellite : The number of the satellite used for the measurement will be
displayed.
Bearing, elevation angle
: The bearing and elevation angle of the satellite will be dis-
played.
Signal strength : The strength of the signal of the satellite from which signals
are being received will be displayed. If the value is 20 or
less, the satellite may not be usable for measurements.
The following items will be displayed only when a beacon receiver is connected and
operating normally.
● Items
Frequency : The frequency of the beacon station from which signals are
being received will be displayed.
Baud rate : The baud rate of the beacon station from which signals are
being received will be displayed.
RSSI : The reception strength of the beacon station from which sig-
nals are being received will be displayed. If the value is 100
or less, the beacon may be not possible to receive signals.
To Next Page
Loading...
