Keysight N1913 - Environmental Conditions; Regulatory Information

10 Keysight N1913/1914A User’s Guide
Environmental Conditions
The N1913/1914A is designed for indoor use and in an area with low
condensation. The table below shows the general environmental requirements for
this instrument.
Regulatory Information
The N1913/1914A EPM Series power meters comply with the following safety and
Electromagnetic Compatibility (EMC) compliances:
Safety compliance
– IEC 61010-1:2010/EN 61010-1:2010 (3rd Edition)
– Canada: CAN/CSA-C22.2 No. 61010-1-12
– USA: ANSI/UL 61010-1 (3rd Edition)
EMC compliance
– IEC 61326-1:2005/EN 61326-1:2006
– CISPR11:2003/EN 55011:2007, Group 1 Class A
– Canada: ICES/NMB-001:Issue 4, June 2006
– Australia/New Zealand: AS/NZS CISPR 11:2004
Environmental condition Requirement
Temperature
Operating condition
– 0 °C to 55 °C
Storage condition
– –40 °C to 70 °C
Humidity
Operating condition
– Up to 95% RH at 40°C (non-condensing)
Storage condition
– Up to 90% RH at 65°C (non-condensing)
Altitude Up to 4600 m
Pollution degree 2