Using E9300 E-Series Power Sensors 3
Keysight N1913/1914A User’s Guide 143
Electromagnetic Compatibility (EMC) Measurements
The low frequency range of the E9304A make it the ideal choice for making EMC
measurements to CISPR (Comite International Special Perturbations
Radioelectriques) requirements, and electromagnetic interference (EMI) test
applications such as the radiated immunity test (IEC61000-4-3).
DC coupling of the E9304A input allows excellent low frequency coverage.
However, the presence of any dc voltages mixed with the signal has an adverse
effect on the accuracy of the power measurement.
The E9304A sensor is DC coupled. DC voltages in excess of the maximum value
(5 VDC) can damage the sensing diode.
To Next Page
Loading...
