Keysight N1913 - Single Function Measurement; Figure 2-28 Function Pop-Up

2 General Power Meter Functions
92 Keysight N1913/1914A User’s Guide
Single Function Measurement
Figure 2-27 shows an average measurement assigned in the upper measurement
line of the upper window. (For single channel power meter, N1913A, the Channel
field will be disabled, as shown in Figure 2-27).
1 Use the , , , , to highlight the Combination function field.
2 Press to display the Function pop-up, and use the and to
highlight Single.
Figure 2-28 Function pop-up
3 Press to complete the entry.
4 The Meas field is set to Avg by default.
5 Press key to complete the setup and display the measurement results.
NOTE
The gate field is disabled if trigger acquisition is Free Run.