9 Maintenance
238 Keysight N1913/1914A User’s Guide
Erasing Memory Data
If you need to erase the EPM Series Power Meter’s memory, for example, before you
return it to Keysight Technologies for repair or calibration, of all data stored in it.
The memory data erased includes the save/recall states and power on last states.
The following procedure explains how to do this.
1 Press the key.
2 Press .
3 Press .
4 Press .
5 If you are sure, press the Confirm key.
6 A pop-up appears, as shown in Figure 9-4 informing you of the status of the
procedure.
Figure 9-4 Secure erase status pop-up
To Next Page
Loading...
