2 General Power Meter Functions
122 Keysight N1913/1914A User’s Guide
VGA Output (Optional)
The VGA output is used to project the meter’s small display to a bigger monitor or
screen. This VGA output feature is available as an orderable option.
The VGA output ON/OFF selection is provided via the front panel and SCPI. The
default setting is OFF.
To access the VGA output selection,
1 Press , and select .
2 In the Service menu, press and select .
3 Press to toggle ON/OFF the VGA feature (see Figure 2-60).
Figure 2-60 VGA toggle ON/OFF
To Next Page
Loading...
