Keysight N1913 - Figure 2-32 Hold Pop-Up; Figure 2-33 Min Hold and Max Hold Measurement Mode Indicated in the Display

General Power Meter Functions 2
Keysight N1913/1914A User’s Guide 95
To set max hold/min hold,
1 Press to display the Measurement Setup menu.
2 Use the , , , , to highlight the Hold function field.
3 Press to display the Hold pop-up, and use the and to
highlight Min or Max (see Figure 2-32).
Figure 2-32 Hold pop-up
4 Press to complete the entry.
5 Press key to complete the setup and display the measurements
results.
Figure 2-33 Min Hold and Max Hold measurement mode indicated in the
display