Keysight N1913 - Editing a Registers Name; Figure 2-39 File Name Pop-Up; Figure 2-40 Recall Pop-Up; Recalling a Measurement Setup

General Power Meter Functions 2
Keysight N1913/1914A User’s Guide 101
Editing a Register’s Name
1 If you have not already done so, press , .
2 Use the and keys to select the required register and press .
The selected name is displayed in a pop-up window. Modify this as required:
Figure 2-39 File name pop-up
3 Use and keys to modify the character on which the cursor is currently
positioned.
4 Use or to move to other characters.
5 Use and as required.
6 To confirm your choice press .
Recalling a Measurement Setup
1 Press , .
2 Use the and keys to select the required register and press . The
key is disabled (grayed out) when an unused register is selected.
Figure 2-40 Recall pop-up
3 Press .
Save/Recall
Edit Name
Insert Char
Delete Char
Enter
Save/Recall
Recall
Recall
Confirm