General Power Meter Functions 2
Keysight N1913/1914A User’s Guide 129
Running Time
Typical running times and conditions as follows:
– This battery pack uses Lithium-ion (Li-ion) batteries.
– Do not short circuit the battery terminals.
– Do not subject the battery to excessive heat.
– Do not dispose of by burning.
– Lithium-ion (Li-ion) cells are considerably more environmentally friendly
than Nickel-Cadmium (NiCD) cells but you should follow battery safety
guidelines.
– Refer to your local country regulatory requirements on the disposal of
Lithium-ion (Li-ion) batteries
Power Meter
Model
Sensor LCD Backlight ON Sensor LCD Backlight
OFF
No Sensor LCD Backlight
ON
No Sensor LCD Backlight
OFF
N1913A
N1914A
Up to 6 hours Up to 7 hours 20 minutes Up to 6 hours 15 minutes Up to 7 hours 30 minutes
Use the battery only for its intended purpose. Only use the Keysight battery
option power meter models to charge the battery.
The battery packs should be stored in an environment with low humidity and
free from corrosive gas at a recommended temperature range <21 °C.
Extended exposure to temperatures above 45 °C could degrade the battery’s
performance and life.
To Next Page
Loading...
