Kohler KDI 1903 TCR

261
EN
Fig 11.57
Important

Check that the retainer capscrew ST_15 (Fig. 11.55) is
not present in point X on housing F .

Always replace the gasket W after each assembly.

Lubricate the gasket W with oil before assembling it.
1.
Insert the gasket W in the seat on the flange of the oil
hose D .
2.
Secure the oil intake hose D using the screws C .
3.
Perform the operations described in Par. 9.4.3 to
assemble the oil sump.
Fig 11.58