DETAILED CONTROLS AND GAUGES OPERATION
3-142
Method Of Use
When adding grease with grease gun (1), keep the engine running at a medium speed and then add grease.
1. Set the greasing mode selector switch on the left side of
the operator's seat inside the cab room to the MANUAL
position.
2. Remove grease gun (1) from holder (2), then move to the
greasing posture.
3. Pull lever (3) of grease gun (1) with your finger. When
lever (3) is pulled, the greasing pump is automatically actu-
ated and discharges grease. When you release lever (3),
the supply of grease stops.
Precautions When Using
q Set so that the grease fitting and the nozzle at the tip of the
grease gun are perpendicular.
To Next Page
Loading...
