MACHINE OPERATIONS AND CONTROLS OPERATION
3-196
2. Turn swing lock switch (2) ON and check that the swing
lock monitor lights up.
3. To complete the warm-up operation of the hydraulic equip-
ment more quickly, set the working mode to P mode
(heavy-duty mode).
For details of the procedure for setting the working mode,
see “Working Mode Selector Switch (3-31)“.
4. Move lock lever (3) slowly to the FREE position (F), then
raise the bucket from the ground.
5. Turn fuel control dial (4) to a point midway between low
idling (MIN) and full speed (MAX).
When the work equipment is retracted, take care that it does not interfere with the machine body or
ground.
To Next Page
Loading...
