OPERATION MACHINE OPERATIONS AND CONTROLS
3-207
1. Pull rope (R) of the engine emergency stop switch. Indica-
tor lamp (L) goes out and the engine emergency stop is
cancelled.
2. Turn the starting switch key to the ON position.
3. Check that engine emergency stop warning lamp (C) on
the console panel to the left of the operator's seat inside
the cab is off.
4. Start the engine. For details, see “STARTING ENGINE (3-
189)“.
When the engine is stopped with the emergency stop switch, there is no need to bleed air from the fuel circuit.
To Next Page
Loading...
