12
Using PageScope Web Connection
12-82 IC-206
2
Reminder
"Auto Reception", "INTERVAL", "Reply Address", "Header Print" and the
settings below "Internet Fax Setting" appear in the page only if fax kit
FK-506 is installed.
To change the settings on the Network tab, click the [Apply] button, and
then, after "Updated Successful" appears, click the [Reset] button on the
page that appears after clicking "NIC and Printer Controller Reset" in the
menu under "Maintenance" on the System tab; otherwise, the changes
to the settings will not be applied.
To Next Page