X75HD/X75SD Installation and Operation Manual 85
Chapter 5
Initial Configuration
Overview
This chapter describes the various configurations and settings that are
required before you begin operating the X75HD/X75SD. Although you
can modify all parameters and settings at any point during operation,
there are certain control options and configurations that you need to set
first, including those listed below:
• “Initial Power-Up and Control Steps” on page 86
• “Configuring Network Settings” on page 88
• “Remotely Controlling X75HD/X75SD Systems” on page 95
• “Processing Modes” on page 101
• “Configuring Video” on page 105
• “Configuring Audio” on page 107
Unless otherwise specified, instructions in this chapter are provided for
making changes via a local or remote control panel.
For more details on using local and remote control panels, see the
Control Panels for X75 Systems Installation and Operation Manual.
To Next Page
Loading...
