190 X75HD/X75SD Installation and Operation Manual
Chapter 10: Special Function Buttons
• Path: Using this feature, you can establish the path of the parameter
that you are currently viewing or adjusting. To obtain the path,
select Path from the options list, and then press Enter. Rotate the
control knob to view the entire path.
• Lock Panel: By selecting and entering this parameter, all card-edge
controls are locked out, preventing accidental changes. To remove
the Lock Panel function, press Ctrl + Exit. If you are using a
DPS-575 or RC-575 to control the X75, press the Default + Exit
buttons on the DPS-575 or RC-575 to remove the locked panel
function.
• Setup: The Setup menu contains a number of parameters that affect
how your display screen operates (see “Display Screen Setup
Parameters” on page 191).
More information on each of these control options can be found in the
Control Panels for X75 Systems Installation and Operation Manual.
Rebooting Shortcut
To reboot the X75HD/X75SD unit without using the power switch,
press the SHIFT + CTL + NR buttons simultaneously.
To Next Page
