304 X75HD/X75SD Installation and Operation Manual
Appendix D: Software
Upgrading Module Firmware
Firmware upgrading is a routine procedure that you must perform to
install newer versions of software on the X75HD/X75SD. Pilot,
Co-Pilot, or Navigator software applications are required for this
procedure. You can use either the Discovery or the drag-and-drop
method. When performing the upgrading procedure, check the
appropriate readme file to confirm which files are needed. Use care to
ensure that you upload the correct files to the intended module.
If for some reason the upgrade fails, the module may not respond to
controls and will appear to be non-functional. In that event, follow the
steps described in “Correcting a Failed Upgrade Procedure” on
page 310.
Upgrading the Firmware
Follow these steps to upgrade the firmware:
1. Download the most recent appropriate upgrade package from the
Leitch Web site or from your CD-ROM.
2. If the affected module has not been discovered, perform the
Discovery operation, as described in your CCS software application
manual or online help.
3. From the To ols menu, select Software Upgrade.
To Next Page
