X75SD/X75HD Installation and Operation Manual 17
Chapter 1: Introduction
Options
Table 1-2 describes the various options available for X75HD/X75SD
systems. Some can be installed in the factory at the time of purchase,
while other options and upgrades can be ordered and installed at a later
time. The X75OPT-HDDUOCON software key option (see page 21) is
required for simultaneous up, down, and cross conversion.
For further information on the cables described in this table, see
“Cables and Pinouts” on page 195.
Table 1-2. X75HD/X75SD System Options
Product Code Description Major Features
System Options
X75OPT-A3D Analog video input submodule with
3D adaptive comb filtering,
composite, S-video, and analog
component Betacam
TM
inputs
Field upgradable or factory installed
X75OPT-A3D-1 Same as the X75OPT-A3D, but with
alternate color decoder algorithm
Field upgradable or factory installed
X75OPT-AS-8 8-channel audio synchronizer with
4-channel analog / 2 AES / 2 groups
of SD and HD de-embedding and
embedding possible
Mounts inside any X75HD/X75SD system,
and includes the following:
• Analog, AES/EBU, and embedded
SD-SDI and HD-SDI audio I/O
• Eight-channel processing
• Audio analog-to-digital conversion
• Audio digital-to-analog conversion
• SD/HD audio embedding
• SD/HD audio de-embedding
• Audio synchronizing
• Audio delay insertion
• Audio processing amplification
• Coaxial breakout cables set
X75OPT-AS-8-L Audio synchronizer module with
audio limiter
Same as X75OPT-AS-8, but with optional
audio limiter soft key option
To Next Page
Loading...
