X75SD/X75HD Installation and Operation Manual 7
Chapter 1: Introduction
Input/Outputs
• Auto-detected inputs
• Two SD-SDI and two HD-SDI inputs
• Color black, tri-level sync and DARS reference inputs
• Optional NTSC/PAL-M/PAL-B/SECAM input with CAV and
S-video inputs
• Ability to provide many outputs, including composite, component,
SD-SDI, HD-SDI, HDTV fiber, DVI-D, and S-video
• SC and optional FC/ST fiber interface for HDTV
• Two or five AES inputs and outputs, at 75 or 110Ω
• Four analog audio inputs and outputs
• GPI inputs and outputs
Operation, Control, and Monitoring
• Three operating modes: Auto Detect, M-Path (multiple-path) and
Simulcast
• Clean video and quiet audio switching capability
• Local and remote control panels
• Control for up to 200+ units from a single control panel
• X75 Web server software application
• Software GUI control and monitoring using CCS Pilot and
Navigator, or monitoring using CoPilot
• SNMP and third-party interfaces
• SMART alarms (global parameters for all inputs—allowing
custom-definitions for how and when alarms are activated,
including priority settings for main and backup inputs)
Hardware Features
• SD (Secure Digital) removable media for storage of parameter
settings; 128 MB included (the maximum size supported by the
X75HD/X75SD is 1 GB)
• Front-to-back air flow
• Single and dual redundant power supplies
To Next Page
Loading...
