Chapter 7: Basic Submaster Operation
Software Version 3.05
93
You can assign a profile to a submaster the same way you assign a profile to a
cue. As the submaster fader is moved, the channel levels on stage follow the
profile curve. Submaster fades that are initiated with Bump buttons also follow
the assigned profile curve
?
ADVANCED TOPICS: See Chapter 18, Profiles.
Selective Recording (Updating) of Subs
When you record subs (and cues or groups), you may want to record only a
specified list of channels rather than all channels that are active on stage.
There are two ways to define the channels that you want to record:
?? Specify the channels that you want to include in the Record command.
?? Specify the channels that you want to exclude from the Record
command.
?
BASIC RULE: Whenever you execute a Record command, the
console assumes that you want to record live levels for all channels, unless you
specify a different list of channels, or specify a list of channels to be excluded
from the list of all channels.
?
ADVANCED TOPICS: See Chapter 24, Selective Recording.
To Next Page
Loading...
