Chapter 18: Profiles
Software Version 3.05
195
? EXAMPLE: To define a range of fade points in an edited profile:
(FIX RANGE) [#] [>] [#] [ENTER]
Profile Utilities
There are three functions available in the Profile Editor subdisplay for
manipulating profiles as follows:
?? Renumber Profile
?? Copy Profile
?? Delete Profile
Pressing the (RENUM PROFL) soft key reassigns the contents of the source
profile to the new destination, erasing the contents of the source profile.
Pressing the (COPY PROFL) soft key creates a second identical profile from
the source profile and maintains the contents of both the source and destination
profiles. Pressing the (DEL. PROFL) soft key deletes the contents of the
selected profile.
? EXAMPLE: To renumber the current profile:
(RENUM PROFL) [destination #] [ENTER] ("@" is
automatically inserted in Command
Line after the source profile number with
the Renumber, Copy and Delete commands.)
? EXAMPLE: To renumber a profile other than the current profile:
1. (RENUM PROFL)
2. [CLEAR] [CLEAR] etc. (Clears default
profile from Command Line.)
3. [source #] [@] [destination #] [ENTER]
? EXAMPLE: To copy the current profile:
(COPY PROFL) [destination #] [ENTER}
? EXAMPLE: To delete the current profile:
(DEL PROFL) [#] [ENTER]
If you do not specify a number, the current profile will be deleted (the profile in
reverse video).
To Next Page
Loading...
