Auxiliary Monitor
Software Version 3.05
G-3
? EXAMPLE: To show only the current active channels on the
Auxiliary monitor:
1. [GO TO CUE] [#] [ENTER]
2. [SETUP]
3. (DISP SETUP)
4. (AUX CHANL) [ENTER]
Using the (AUX CHANL) [ENTER] command when the Auxiliary monitor is
already displaying a customized channel list causes the display to show all the
channels again.
? EXAMPLE: To show a selected channel list on the Auxiliary
monitor:
1. [SETUP]
2. (DISP SETUP)
3. (AUX CHANL) [# list] [ENTER]
?
HINT: (AUX CHANL) [# list] [ENTER] acts like a "Show Channel"
command for the Auxiliary monitor. (AUX CHANL) [ENTER] acts like a
"Show All" command when channels are currently formatted in the Auxiliary
monitor.
User Guide Index
**, 26, 38
@, 17
absolute vs. proportional levels, 166
Active Level, 155
Aim and Load method, 211
All Bumps soft key, 85
ALPHA, 23
alpha character to Bump button assignment, 123
Alpha mode, 123
Alternate effect pattern, 41
Ambiguous Reference Error message, 127
arrow keys, 25
assignment of control channels to dimmers, 11
Automated channels, 29, 201
Automatic Fader Clearing mode, 62, 100
Auxiliary Monitor option, 1
B.O., 20
Back Panel power outlets, 4
backspace key, 75
Bad Battery Warning, 20
ballistics, 78
battery replacement, 3
To Next Page
Loading...
