Colortran Encore Control Console
Software Version 3.05
238
[-] [SUB] [5] [>] [10] [RECORD CUE] [#] [ENTER]
? EXAMPLE: To record group 3 without any of the channel levels in
the channels that are assigned to subs
1 - 12:
[-] [SUB] [1] [>] [12] [RECORD GROUP] [3] [ENTER]
? NOTE: In the example above, any tracking levels that exist in
previous cues are not excluded by the [MINUS] key command.
Selective Overwriting of Pre-existing
Items (Updating)
When you use the [RECORD CUE], [RECORD GROUP], or [RECORD SUB]
hard keys in a non-selective recording command, you completely replace the
contents of the pre-existing item. With selective recording, only the specified
channels are updated to their current stage level in a pre-existing cue, group, or
submaster. All un-addressed channels in an existing item remain unchanged
after a selective recording command.
? EXAMPLE: Assume sub 1 is channels 1 - 10 at Full, and channels 1-
10 are at 50% on stage:
[1] [>] [5] [RECORD SUB] [1] [ENTER] (Sub 1 channels
1 - 5 set to 50%, and
channels 6 - 10 remain at Full.)
To Next Page
Loading...
