Colortran Encore Control Console
Software Version 3.05
142
? EXAMPLE: To use the Help feature (with a disk containing the
Help file already in the disk drive):
1. Select the key about which you seek information, so it shows on the
command line. This
sometimes requires other keypresses first (e.g. for cue attributes like Link Reps,
Fade Effects, etc.).
2. [HELP]
- or -
1. [HELP]
2. Use the arrow keys to select a topic.
3. [ENTER]
- or -
1. [HELP]
2. When the Main Topic Menu appears, press any hard or soft key for
information about that key.
When you are viewing a Help topic, you can use the Up and Down Arrows, and
the [PAGE UP] and [PAGE DOWN] keys to scroll the information shown in
the display. Pressing the Right or Left Arrow keys displays the following or
previous topic from the topic list.
There is a list of Related Topics at the end of each Help topic. The first Related
Topic is shown in a gray background to indicate that if you press [ENTER] you
will see that topic. You can use the [LAST] and [NEXT] keys to select a
different Related Topic that you wish to view, then press [ENTER]. Anytime
that you are viewing a Help topic, you can always return to the Main Topic
Menu by simply pressing [HELP].
Flash Command Utility
The (FLASH) soft key allows you to immediately locate lights controlled by
designated channels by alternately switching their stage level between zero and
Full. You can use the (FLASH) soft key in the Stage display to flash selected
channels on stage. Any channels may be selected with the flash command.
To stop the Flash command press the [CLEAR] key, execute a new command,
or select a new display.
? EXAMPLE: To flash channel 2:
(FLASH) [2] [ENTER]
To Next Page
Loading...
