Software Version 3.05
3
CHAPTER 1:
Setting Up
Your Console
Step 1: Unpacking
Carefully unpack your console from its carton. Underneath the console, you
will find:
?? This manual
?? A 7' AC power cable
?? One 3.5", 1.44MB floppy show storage disk
?? One 3.5", 1.44MB floppy disk containing the console operating program
?? One 3.5", 1.44MB floppy disk containing the Help file
?? 1 or 2 gooseneck Worklight fixtures (if the option was ordered)
In a separate shipping container, you will find the console monitor. Carefully
inspect all items for evidence of shipping damage. If any damage is noted, call
the shipping company for an inspection. It is recommended that you keep the
shipping containers in case you need to transport your console in the future.
Step 2: Set Up
Place your console on a sturdy horizontal surface with at least 6" (152mm) of
clearance behind the console for cables and for proper ventilation. The
environment should be dust-free with an ambient temperature of 40?F (4?C) to
90?F (32?C) and a relative humidity between 8% to 80% without condensation.
?
WARNING!! Do not run the console while it is in a road case, or
damage may occur.
Do not expose console to rain or moisture, or
damage may occur.
Place your monitor on a sturdy surface near the console in accordance with the
instructions provided by the monitor manufacturer.
Step 3: Power Connections
Power Supply Specifications: The console has an auto-ranging
power supply designed to operate on AC power at any nominal voltage between
To Next Page
Loading...