Chapter 6: Setting Channel Levels
Software Version 3.05
83
? EXAMPLE: To capture all active channels (channels reading above
zero):
[ENTER] (All channels reading above zero are now
captured on the wheel.)
?
BASIC RULE: All captured channels are unaffected by executed
cues; pressing the GO button does not affect them, even if the channels have
new level assignments in the new cue. Captured channels remain under active
control of the wheel until control is released by pressing the [CLEAR] key.
BASIC RULE EXCEPTION: The exception to the rule above is
when the [GO TO CUE] key is used in the Tracksheet or Preview displays.
?
ADVANCED TOPICS: See Chapter 9, Playing Back Cues.
Wheel Control
The wheel is used to adjust the levels of individual or multiple channels
proportionally up or down. Whenever any channels are captured, their levels
are adjustable on the wheel.
? EXAMPLE: To set channels to 50%, and then use wheel control to
adjust the level in the Stage, Preview, Group, Submaster and Tracksheet
displays:
[# list] [@] [50] [ENTER] (Channel list now active
on the wheel, even if the
level specified is zero.)
? EXAMPLE: To capture channels at their active levels in the
Stage, Preview, Group, Submaster and Tracksheet displays:
[# list] [ENTER] (Channels in list now
captured and controlled by the
wheel.)
? NOTE: If you find that the tracking color of certain channels is not
appropriate to the display, you may have moved the wheel accidentally while
channels were captured. There is a possibility of the wheel moving so slightly
that the movement is noted internally without changing the channel level in the
display. If you find that the tracking color has changed, it may be prudent to
confirm that levels are still tracking by checking the Tracksheet display.
To Next Page
Loading...
