Colortran Encore Control Console
Software Version 3.05
26
Changing Displays
To change to a different display, press one of the ten display keys on the
console. The hard display keys are listed below:
?? [STAGE] ?? [CUESHEET]
?? [PREVIEW] ?? [TRACKSHEET]
?? [GROUP] ?? [PLAYBACK]
?? [SUBMASTER] ?? [PATCH]
?? [EFFECT] ?? [SETUP]
The following subdisplay soft keys are available in the Patch display:
?? (PROFL DISP.) = Profile Editor subdisplay (also found in
the Setup display)
?? (NONDM DISP.) = Non-Dim Dimmers subdisplay
?? (PARK DISP.) = Parked Dimmers subdisplay
Macro contents are displayed by pressing the (VIEW MACRO) soft key in the
Setup display.
?
ADVANCED TOPICS: See Chapter 21, Macros.
Default Items
In many displays, one (or more) of the items listed is shown in reverse video.
Items shown in reverse video are the default items in the list. This means that
if you enter a command without specifying the item to act upon, the console
will automatically insert the default item(s) into the Command Line.
? EXAMPLE: In the Patch: By Channel display, assume channel 1
is shown in reverse video (it is the "current" channel). To patch channel 1 to
dimmer 50:
[@] [50] [ENTER]
To Next Page
Loading...
