Chapter 14: Groups
Software Version 3.05
163
? EXAMPLE: To copy a group to group 2, in the Group display:
1. (SEL. GROUP) [#] [ENTER]
2. (COPY GROUP) [2] [ENTER]
? EXAMPLE: To copy any group to another group, in the Group
display:
1. (COPY GROUP)
2. [CLEAR] [CLEAR] (Deletes current group
default information in the
Command Line, so you can enter a different group
number.)
3. [source #] [@] [destination #] [ENTER] (Copies source group #
into destination group #.)
?
BASIC RULE: The item number being copied from is the "source",
and the number being copied to is the "destination" item.
Renumbering Groups
You can renumber groups using the (RENUM GROUP) soft key in the Group
display.
? EXAMPLE: To renumber the current group in the Group display:
1. (SEL. GROUP) [#] [ENTER]
2. (RENUM GROUP) [destination #] [ENTER]
? EXAMPLE: To renumber any group to another number in the Group
display:
1. (RENUM GROUP)
2. [CLEAR] [CLEAR] (Deletes current group
default information in the
Command Line, so you can enter a different group
number.)
3. [source #] [@] [destination #] [ENTER]
? NOTE: When you renumber a group, the contents of the source
group are assigned to the destination group, and the source group is deleted
entirely.
To Next Page
Loading...
