Colortran Encore Control Console
Software Version 3.05
124
Editing Existing Cue Levels in Tracking
Mode
Edits made to existing cues while in the Tracking mode will allow any
channel(s) assigned a new level to continue to read at that level in subsequent
cues until it encounters another hard level. The new level is said to “track
through” into later cues. You must be sure you want the new channel level to
continue into later cues, because when you change it in Tracking mode it can
track through a large number of later cues. Changes made to a soft channel
level will always change it to a hard level while in any Track Mode.
? EXAMPLE: To see how changes “track through” into later cues, start
with the cue levels shown in Figure 10.4.a:
1. [CUE] [15] [ENTER] (Selects cue 15 for editing.)
2. [5] [@] [5] [ENTER] (Channel 5 is set to 50%. The
change tracks until cue 20.)
To Next Page
Loading...
