Colortran Encore Control Console
Software Version 3.05
148
? EXAMPLE: To print a range of cues:
1. (PRINT OPTNS)
2. (PRINT ITEMS)
3. (PRINT CUES) [#] [>] [#] [ENTER]
? EXAMPLE: To print all cues, do not specify a range:
1. (PRINT OPTNS)
2. (PRINT ITEMS)
3. (PRINT CUES) [ENTER]
? NOTE: Cues are always printed as they appear in the Preview
display.
Printing Limited Channels: You can print only the channels that you
wish to see by selecting display formatting prior to any printing commands.
Use the (SHOW CHANL) soft key to format the display to the channels that
you want in your printout.
The word "Filtered" in bold at the bottom of each page of a printout is called
the Filtered Flag. The Filtered Flag appears if display formatting was in place
when the print command is executed, indicating some channels are not shown
in the printout. The following print command soft keys are affected by the
current display formatting:
?? (PRINT CUE)
?? (PRINT GROUP)
?? (PRINT SUB)
?? (PRINT TRACK)
To Next Page
Loading...
