Colortran Encore Control Console
Software Version 3.05
ii
The Setup Display (a blind configuration display) 53
CHAPTER 4: 57
Console System Setup 57
Using the Setup Display 57
System Setup 58
Show Name 58
Number of Channels and Dimmers 59
Selecting Dimmer Protocol 60
Hand Held Remote 60
MIDI Interface 61
Reference By Name 61
Playback Fader Clearing Modes 61
CHAPTER 5: 63
Setting Up the Soft Patch 63
What is a Soft Patch? 63
Patch Displays 64
Patch: By Channel Display Mode 65
Patch: By Dimmer Display Mode 66
Other Patch Display Modes 66
Patching Channels to Dimmers 67
Unpatching Channels and Dimmers 68
Default Dimmer or Channel 68
Patch 1 To 1 69
Automated Channels 70
CHAPTER 6: 71
Setting Channel Levels 71
Two-Scene Preset Mode* 71
Channel Faders vs. Keypad in Multi-Scene Mode* 71
Crossfader Time* 73
Keypad Commands 74
Channel Lists 74
Captured Channels 75
Wheel Control 77
Proportional Control with the Wheel 78
Restoring Channel Levels (“Undo”) 78
Remainder Dim Command 79
CHAPTER 7: 81
Basic Submaster Operation 81
Submasters 81
Normal Submaster 82
Record Sub Command 82
Creating Subs Blind 83
Bump Buttons 84
Timed Submasters 86
Submaster Profiles 86
Selective Recording (Updating) of Subs 87
CHAPTER 8: 89
Creating and Recording Cues 89
Cues 89
Cue Time 90
Manual Cues 90
To Next Page
Loading...
