Colortran Encore Control Console
Software Version 3.05
D-6
Pitch Wheel 0xe0 1. Executes a specific cue. A maximum downward bend (a MIDI data
value of zero) triggers cue 0, progressing to cue 999.9 as the bend
value increases.
2. The specified cue may be comprised of a three digit number and one
decimal digit.
Program
Change
0xc0 1. Triggers a macro or a Go command.
2. A MIDI program change of zero executes a Go command.
3. A program change of 1 - 100 triggers the Encore macro of the same
number.
MIDI System Messages Recognized by the Encore
Command
Name
Hexa-
decimal
Code
Description of Response by the Encore
Song Select
0xf3
1. Loads a cue number into the console's Next Cue register.
2. The cue range is restricted to integer values only, from 0 - 127.
3. The loaded cue is executed with the next Go command, either from a
MIDI command or by pressing the GO button.
Start 0xfa Executes an Encore Go command.
Stop 0xfc 1. Pauses execution of running cues.
2. Unlike the [STOP/REV] key on the Encore, a MIDI Stop command
does not execute a reverse fade to the previous cue when no cues are
currently running.
Resume 0xfb Resumes execution of any paused cues.
0xff Executes a Go To Cue 0 command. Cue 0 is the standard blackout
cue.
To Next Page
Loading...
