2-30 Service Manual
5060-4xx
Install Tray x or
Cancel Job
Install Bin x or
Cancel Job
Install Duplex or
Cancel Job
This message is displayed when the printer requests the
user to insert tray x before it can continue printing the job.
The printer needs to pick media from the missing tray or the
trays below it.
Tray=Tray 1, Tray 2, Tray 3, Tray 4, or Tray 5
Note: This message displays when refilling the trays during
a job. Before filling tray x take the printer offline by pressing
Stop and wait for pages to reach the output bin.
The following actions can be taken:
• Insert the requested tray
or
• Press Menu to access the Busy/Waiting Menu.
The following functions are available using the Busy/Waiting
Menu:
•Cancel Job
• Reset Printer
• Reset Active Bin
• Check Supply Levels
This message is displayed when the user has Hot
Unplugged a paper handling option and the printer requires
the reinstallation of the option to print a page which has
been formatted by an install Tray x interpreter prior to
removal of the option or Cancel Job:
•Bin x (x=1,2 or 3)
•Tray x (x=2,3,4 or 5)
•Duplex
The following actions can be taken:
• Insert the requested option
or
• Press Menu to access the Busy/Waiting Menu Group.
The following functions are available using the Busy/Waiting
Menu:
•Cancel Job
• Reset Printer
• Reset Active Bin
• Check Supply Levels
No DRAM Installed This message is displayed when the printer is turned on and
no DRAM is detected.
User primary
message
User secondary
message
Explanation
To Next Page
Loading...
