2-38 Service Manual
5060-4xx
58 Too Many Bins
Attached
This message is displayed when too many optional bins are
attached to the printer or if an unsupported combination of
bins is installed.
58 Too Many Disks
Installed
This message is displayed when too many disks are
installed.
Note: Some configurations of different output options
require the installation of one option before the other.
58 Too Many Flash
Options
This message is displayed when too many Flash Options
are installed. Verify the maximum number of flash memory
options which may be installed.
Note: Press Go to clear the message. The extra flash
memory options are ignored.
59 Incompatible
Output Bin x
59 Incompatible
Tray x
59 Incompatible
Duplex
These messages are displayed when the user installs an
incompatible option.
The following options may be incompatible for use on one or
more C76x models:
• Output Bin x (x=1, 2 or 3)
•Tray x (x=2,3,4 or 5)
•Duplex
• Envelope feeder
The user is required to remove the incompatible option and
press Go to clear the message.
Note: If the user installed the incompatible option to satisfy a
Check Option Connections/Reattach Option attendance
condition, the user must reinstall an associated compatible
option or Hot Unplug the option.
61 Defective Disk This message is displayed when the printer detects a
defective disk. This error may occur at power on, or during
disk format and write operations.
Press Go to clear the message.
The disk is marked as defective and normal printer
operation continues.
Disk operations are not allowed with a defective disk and the
Format Disk menu item is not shown.
62 Disk Full This message is displayed when there is not enough free
space on the disk to hold the data that have been requested
to be written to the disk. This message is displayed for both
resource collection and PostScript when the disk is full.
The following actions can be taken, however this deletes all
downloaded Fonts and Macros not written to disk.
• Press Go to clear the message and continue processing
the print job
• Press Menu to access the Busy/Waiting Menu
The following functions may be available:
•Cancel Job
• Reset Printer
• Reset Active Bin
• Check Supply Levels
Note: Menu Lockout does NOT prevent access to the Busy/
Waiting Menu.
User primary
message
User secondary
message
Explanation
To Next Page
Loading...
