– Tamper motor (left) removal
– Tamper drive belt removal
– Stapler output bin LED removal
– Staple, hole punch tray link tension spring removal
– Staple, hole punch tray link removal
– Sensor (hole punch box present) removal
– Sensor (HPU rear door interlock) removal
Staple, hole punch finisher parts catalog
– Staple, hole punch finisher option 1
– Staple, hole punch finisher option 2
– Staple, hole punch finisher option 3
– Staple, hole punch finisher option 4
• The following topics were removed:
– Output expander failure service check
– Output expander jam service check
• The following topics were revised:
– 3xx error messages (300-399.99)
– 4xx error messages (400-499.99)
– Option tray symptoms
– Sensor (mailbox pass through) jam service check
– Mailbox diverter jam service check
– HCOE diverter jam service check
– Sensor (HCOE pass through) jam service check
– Sensor (finisher pass through) jam service check
– Finisher left tamper jam service check
– Finisher right tamper jam service check
– Finisher ejector jam service check
– Finisher diverter jam service check
– Finisher paddle jam service check
– Finisher tray holder jam service check
– Mailbox incorrect bin exit service check
– Finisher door undetected service check
– Stapler carriage failure service check
– Finisher bin media present error service check
– Output options
• Added Bin insert (40X8855) to Parts catalog Assembly 1.
4063
Preface
36
To Next Page
Loading...
