3 Navigate to the folder where the zip files are extracted from the Service Restore Tool.
4 Select the file to import, and then click Import.
5 Repeat step 2 through step 4 for the other files that are included in the extracted zip file.
Updating the printer
firmware
Warning—Potential Damage: Before updating the printer firmware, ask the next level of support for the
correct code. Using an incorrect code level may damage the printer.
Using a
flash
drive
Note: The printer must be in ready state to update the firmware.
This option is available only in printer models with front USB port.
1 Insert the
flash
drive into the USB port.
2 Depending on the printer model, do any of the following:
• From the control panel, navigate to USB Menu: Print from USB > Accept or OK, and then select the file
that you need to flash.
• Select the
firmware
file.
Note: Do not turn
o
the printer while the update is going on.
Using a network computer
Using the File Transfer Protocol (FTP)
Note: The printer must be in ready state to update the firmware.
1 Turn on the printer.
2 Obtain the IP address from the home screen.
7018
Parts removal
207
To Next Page
Loading...
