Lexmark XM3250 - Notice to Users of the New Zealand Telephone Network; Japanese Telecom Notice

5 Disconnect the three cables (E).
6 Remove the power supply.
Duplex removal
1 Remove the rear cover. See “Rear door and cover removal” on page 295.
2 Remove the power supply. See “Power supply removal” on page 273.
3 Position the printer on its side.
Warning—Potential Damage: The ADF might swing open while you position the printer on its side.
Warning—Potential Damage: To avoid damaging the paper stop, close it after positioning the printer.
7018
Parts removal
275